Center of Advanced Electronic Material Research

Introduction

Center of Advanced Electronic Material Research of Shenzhen Institutes of Advanced Technology (SIAT), Chinese Academy of Sciences (CAS), was founded in 2006. The center is dedicated to developing advanced materials, both for fundamental researches and industrial applications. Over the past 10 years, CAMR has actively participated in or undertaken more than 100 national scientific and industrial programs, published nearly 450 SCI journal papers and 380 patents. The center has become member of the “National Engineering Laboratory for Advanced Electronic Packaging Materials”. In view of long-term development and relying on the good electronic information industry environment of Guangdong and Shenzhen, CAMR established the Advanced Electronic Packaging Materials Innovation Team of Guangdong Province in 2012. In terms of industrialization, we work closely with middle and downstream customers and domestic equipment companies to achieve the mass production of domestic high-end wafer level packaging materials, leading the world in comprehensive performance and becoming one of the breakthroughs of domestic high-end electronic packaging materials.

Main Research Areas

High efficiency CuIn1-xGaxSe2 (CIGS) thin film solar cells

CuIn1-xGaxSe2 (CIGS) thin film solar cells have been recognized as the most efficient thin-film solar cell, which is fabricated both on rigid substrate such as glass and on flexible substrate such as polyimide (PI). With these advantages such as low cost in fabrication of absorbing layer (thickness ~ 1.0-2.5 microns), light weight, high power density (up to 1100 W/kg in flexible cell), flexible CIGS, high performance for weak-light, long life and strong radiation resistance, CIGS solar cells exhibits the extensive application prospects as shown in Figure 1.

 

 

Kesterite Cu2ZnSnS4 (CZTS) thin film solar cells 

Kesterite Cu2ZnSnS4 (CZTS) thin film solar cells have attracted considerable interests in the last decade  and have shown potential to replace its well-developed predecessor Cu(In,Ga)Se2 solar cell with earth-abundant and environmentally friendly raw materials. The CZTS thin films in our study are fabricated by a two-stage process consisting of precursor deposition by co-sputtering and post-sulfuration treatment which is a suitable method for high volume manufacturing.

  

Flexible encapsulation thin film 

In the conventional flexible encapsulation thin film, a thin compact inorganic Oxides and nitrides layer was usually used as the barrier layer. The soft polymer layers, sandwiched between two subsequent hard inorganic barrier layers, minimized the propagation of defects in the inorganic layer, which improved the barrier performance grammatically. However, the inorganic layers were too stiff to be used as stretchable encapusulation materials in the wearable electronic devices. Therefore we designed two novel encapsulation structures to solve this problem:

 

1.Based on the conventional multilayered structures, the functional layers were deposited on with a waved surface fabricated by micro-fabrication process, such as photolithographic process. This structure could convert the stretching stress into bending stress in the film which made it suitable for the encapsulation of the stretchable devices.  

2.The Elastomer mixed with amount of two-dimensional nanofillers such as clay or graphene was used as the encapsulation materials. In this structure, the layered two-dimensional materials could lengthen the pathway for the gas permeants due to the increased tortuosity, which could still remain good barrier property even under stress.

Researchers

  • SUN Rong

    Title:Professor
    Email:rong.sun@siat.ac.cn
    Areas of Interest:Advanced electronic packaging materials; Embedded electronic components; Organic substrate materials, Key Materials for 3D-IC interaction, etc.

  • ZHAO Tao

    Title:Senior Engineer
    Email:tao.zhao@siat.ac.cn
    Areas of Interest:Nanomaterials synthesized using the chemical method and their applications in electrical packaging

  • ZHANG Guoping

    Title:Professor
    Email:gp.zhang@siat.ac.cn
    Areas of Interest:Self-healing polymer and composites;Flexible and wearable sensors

  • YU Shuhui

    Title:Professor
    Email:sh.yu@siat.ac.cn
    Areas of Interest:Nanocomposites, Dielectric composites for energy storage, High-voltage materials, Physics of materials

  • LIU Zhiquan

    Title:Professor
    Email:zqliu@siat.ac.cn
    Areas of Interest:Microstructure and service reliability of microelectronic materials and package structures

  • ZHU Pengli

    Title:Associate Professor
    Email:pl.zhu@siat.ac.cn
    Areas of Interest:Metal, metal oxide inorganic nanomaterials; Nanocomposites; Erengy storage materials; nanomaterials for electrical packaging

  • ZENG Xiaoliang

    Title:Associate Professor
    Email:xl.zeng@siat.ac.cn
    Areas of Interest:Chip heat dissipation technology and application of heat dissipation materials

  • HU Yougen

    Title:Associate Professor
    Email:yg.hu@siat.ac.cn
    Areas of Interest:Micro - nano functional materials, flexible electronic materials and devices